|
APPLICATION
Display of analog measurements like 0...20mA DC alternatively 4...20mA DC or 0...10V DC alternatively 2..10V DC adjustable by software.
Input up to 250V DC or 2A DC possible.
DESCRIPTION
The 3½ digit programmable display instrument HSB4824D offers full electronic measuring and display capabilities insuring greater precision over existing
electro-mechanical devices. This allows most all display values to be quickly and reliably represented. The alignment parameters are stored in a non-volatile EEPROM memory. Due to the improved technology the long-term drift is
reduced to a minimum. In addition, unwanted readjustment of the device settings through external mechanical influences, such as vibration or by hand, are prevented. The device parameters and calibration are factory set according
to customer demands. We also offer a computer interface and software (Part no. 027010 / page 6/23) for those customers who, at any time, wish to readjust and recalibrate the device to their own needs. The red LED display, with
10mm high digits is clearly readable even from a distance. A supply voltage of 24V DC is required to power the device. The auxiliary voltage is isolated from the measuring circuit using an internal switching power
supply. The supply voltage can also be the measuring voltage, which means that an isolation of the voltages is not necessary. The device can be used for only one voltage supply.
FUNCTION
The positive,
negative and bipolar display ranges, the display value at the input signal of 0, the gain factor and the limit contact for the operate/release point are programmed by HSB. Please supply us with the above information when
ordering. If you have the HSB interface and software (Part No. 027010) you can programm and calibrate the device for your needs.
OPTION
Implementation of differing supply voltage on demand.
|
